0
Ваша корзина пуста!
Analogue Systems RS-60 ADSR (Dual Bus) Eurorack модулиКупить Eurorack модули Analogue Systems RS-60 ADSR (Dual Bus)Analogue Systems RS-60 ADSR (Dual Bus) Eurorack модули

Analogue Systems RS-60 ADSR (Dual Bus)

Рейтинг: 5/5
ПроизводительAnalogue Systems
Доступность:на заказ
Артикул:572426
*еще -3% в корзине при оплате наличными или переводом
Analogue Systems RS-60 ADSR (Dual Bus) Eurorack модули Analogue Systems RS-60 ADSR (Dual Bus) Вы можете купить по выгодной цене в наших музыкальных магазинах в Москве и Санкт-Петербурге, интернет-магазин, доставка по России.
Этот товар поставляется на заказ. Уточним доступность или предложим замену!

Описание


Flexible ADSR envelope with voltage control of decay and release times. Interesting hold and repeat functions turn the envelope into a LFO with gating functions. Classic ADSR type envelope generator. Decay and release times can be voltage controlled via a common input for positive CVs between 0 and 10V. Time ranges of the segments: Attack: 0,5mS to 10S; Decay: 2,5mS to 20S; Release: 2,5mS to 20S.

Two switches affect the behaviour of the RS-60 in different ways:

- STD/STD: Normal ADSR mode. A gate triggers and holds the envelope up to the release phase.

- HOLD/STD: hold will hold the envelope at sustain level. Signals in the gate input have no effect. A signal at the Trig/Retrig-In restarts the AD phase and keeps the envelope at sustain level until the next trigger.

- ONESHOT/STD: Press the swithc into oneshot position and you?ll fire the envelope once. trigger signals at the Trig-Retrig-In will restart th envelope only when oneshot switch is pressed.

- HOLD / GATED REPEAT and HOLD / AUTO REPEAT have the same effect. Attack and decay phases will be repeated and the module acts as a LFO. Rate is dependent on the A/D times and range from 0.003Hz to 300Hz. A gate at the Trig-Retrig-In holds the signal at 10V, without gate the LFO continues cycling.

- STD / GATED REPEAT: The envelope will onbly be looped when a gate signal is present at the Gate-Trig-in

- STD / AUTO REPEAT: A gate at the Trig-Retrig-In holds the signal at 10V, without gate the LFO continues cycling.

- ONE SHOT / GATED REPEAT and ONE SHOT / AUTO REPEAT have the same effect. The oneshot switch generates a gate and fires the envelope. A gate at the Gate-Trig-in will hold the envelope at 10V, without gate the envelope will be looped. The envelope signal is present at two outputs A and B and it?s level can be controlled and inverted with a potentiometer.

This Dual Bus version features two power connectors, meaning it can be directly connected to either an Analog Systems or a Doepfer modular system. – Adapters are no longer necessary.

All modules by Analogue Systems come ready to use with five years warranty mounted in the by the customer preferred rack or cabinet.

For a timely delivery please confirm your choice and configuration as customer or specialised dealer via email

Обзоры

Последний отзыв

Еще нет отзывов об этом товаре.
Пожалуйста напишите (краткую) рецензию....(мин. 100, макс. 2000 знаков)
Во-первых: Оцените данный товар. Пожалуйста, выберите оценку от 0 (плохо) до 5 (отлично). Рейтинг:
Набранные символы:

Комментарии

Добавить комментарий


Вернуться к: Eurorack модули