Neutrik NO2-4FDW-1-A

разъем оптический OpticalCon на панель, 4 контакта под пайку+- 1 LC-Duplex+- заземление корпуса, IP65Chassis connector with hard Nickel plating, 4 solder contacts, 1 LC-Duplex feedthrough socket and 1 shell ground contact (-for SMPTE cable shield)-, waterproof acc. to IP65, front panel mountThe chassis connector acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.Not compatible to SMPTE 344M standard. Suitable for indoor (-studio)- camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltage. For detailed information ask for the White Paper "opticalCON @ SMPTE Indoor Applications".Features & BenefitsDesigned as feedthrough with automatic sealing shutterShutter with silicone gasket protects optical connection from dust an dirtSuitable for indoor (-studio)- camera links considering specific conditions acc. to IEC 60664-1 like pollution degree 1, overvoltage category 1 and rated voltageAccommodates standard LC connectors on the rear for simple installationConnection on the front side either by rugged opticalCON or standard LC connectorWaterproof acc. to IP65 safety standardIn case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP52.Colour coding to identify fiber mode:Multimode - blackSinglemode PC - blueSinglemode APC - green

Подробное описание

Аксессуар	нет
Контакт-деталь	мама
Установка	на панель