0
Ваша корзина пуста!
Скидка
Audio-Technica AT33Sa DJ Картриджи, иглыКупить DJ Картриджи, иглы Audio-Technica AT33SaAudio-Technica AT33Sa DJ Картриджи, иглы

Audio-Technica AT33Sa

Рейтинг: 5/5
ПроизводительAudio-Technica
Доступность:на заказ
Артикул:592179
Специальная цена:
99750 Р
Обычная цена:
114655 Р
Вы экономите:
-14905 Р
*еще -3% в корзине при оплате наличными или переводом
Этот товар поставляется на заказ. Уточним доступность или предложим замену!

Описание

The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission. Features Moving coil cartridge with Shibata stylus delivers exquisite, full-range audio reproduction Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies Neodymium magnet and permendur yoke dramatically enhance the magnetic energy PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer High-separation, wide response dual moving coil VC mold limits unnecessary vibration Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio Specifications
Cartridge & Stylus
Frequency Response 15-50,000 Hz
Channel Separation 30 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Nude square shank
Recommended Load Impedance More than 100 ohms (when head amplifier is connected)
Coil Impedance 10? (1kHz)
DC Resistance 10?
Coil Inductance 22 µm (1kHz)
Output Voltage 0.4 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance 0.5 dB (1 kHz)
Stylus Shape Shibata (line contact)
Cantilever Solid, tapered boron
Static Compliance 40?10-6cm/dyne
Dynamic Compliance 10?10-6cm/dyne (100Hz)
Mounting Half-inch
Dimensions H16?W16.6?D26.5mm
Accessories Included 1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)
Body Material Aluminium/Synthetic Resin
Mounting Feature Half-inch mount
Stylus Curvature Radius Shibata
Type Dual Moving Coil
Weight 6.9g
Notes Note: Moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

Спецификации

Размер и вес товара

Длина: 10.0000CM
Ширина: 10.0000CM
Высота: 10.0000CM
Вес: 1.0000KG
Спецпредложения:
Спецпредложения:
  • Скидки

Обзоры

Последний отзыв

Еще нет отзывов об этом товаре.
Пожалуйста напишите (краткую) рецензию....(мин. 100, макс. 2000 знаков)
Во-первых: Оцените данный товар. Пожалуйста, выберите оценку от 0 (плохо) до 5 (отлично). Рейтинг:
Набранные символы:

Комментарии

Добавить комментарий


Вернуться к: DJ Картриджи, иглы